Eco-Friendly Printing

Latex vs Solvent vs UV Printing: Which Is Right for Your Signage?

Falcon Signs Team2026-04-189 min read

Three Technologies, Three Different Jobs

If you have received quotes from multiple Kenyan signage companies, you have probably seen all three technologies mentioned: latex, eco-solvent, and UV-LED. They are not interchangeable — each has strengths, weaknesses, and a sweet spot.

This guide gives you a buyer-friendly comparison so you can specify the right technology for your project.

1. HP Latex Printing

How it works: Water-based ink with latex polymer binder, cured by heat in-pass.

Strengths:

  • Instantly dry and fully cured
  • Odourless, low-VOC, UL GREENGUARD Gold certified
  • Safe for indoor and sensitive-space installation
  • Wide-gamut colour, scratch-resistant
  • Wide media compatibility (vinyls, papers, fabrics, PVC-free)
  • Energy-efficient and non-hazardous waste

Weaknesses:

  • Slightly higher hardware cost
  • Ink cost marginally higher than eco-solvent per square metre
  • Slower than high-volume solvent printers on outdoor-only jobs

Best for:

  • All indoor branding (walls, windows, wayfinding)
  • Hospitals, schools, and childcare
  • Retail, office, and hospitality interiors
  • Fabric and soft signage
  • Fast-turnaround installations
  • Green-building and certified-interior projects

2. Eco-Solvent Printing

How it works: Mild-solvent ink with glycol ethers as a carrier; requires outgassing time after print.

Strengths:

  • Long outdoor life (3–5 years)
  • Lower ink cost per square metre
  • Good vinyl and banner compatibility
  • Proven durability in outdoor Kenyan conditions

Weaknesses:

  • Requires 24–48 hour outgassing before lamination/installation
  • Mild solvent odour persists for days after install
  • Not suitable for sensitive indoor environments
  • Higher VOC emissions (though lower than hard-solvent)
  • Not GREENGUARD certified

Best for:

  • Outdoor-only banners and posters
  • Vehicle wraps (though HP Latex is increasingly used)
  • Construction-site and billboard graphics
  • Cost-sensitive, short-life outdoor work

3. UV-LED Printing

How it works: UV-reactive ink cured instantly by ultraviolet LED lamps.

Strengths:

  • Instantly cured, immediate finishing and installation
  • Prints on almost any rigid substrate (glass, wood, metal, acrylic, foam board)
  • Excellent outdoor durability (UV-stable by design)
  • No outgassing wait
  • Enables direct-to-substrate printing (no laminating needed)

Weaknesses:

  • Requires UV-curing hardware (higher capital cost)
  • Ink cost higher than both eco-solvent and latex per square metre
  • Historically stiffer print — newer flexible UV inks have narrowed the gap
  • Not all UV inks are GREENGUARD certified (check per printer model)

Best for:

  • Rigid signs (ACP, forex, dibond, acrylic, wood)
  • Direct-to-substrate printing (no lamination)
  • Short runs on unusual materials
  • Packaging and promotional products
  • Outdoor rigid signage

Side-by-Side Decision Table

| Factor | HP Latex | Eco-Solvent | UV-LED |

|---|---|---|---|

| Odour | None | Mild, lingers | None |

| Indoor safety (GREENGUARD) | Yes (Gold) | No | Varies |

| Outgassing wait | None | 24–48 hrs | None |

| Outdoor durability (unlaminated) | 3 years | 3–5 years | 3–5 years |

| Media flexibility | Very high | High | Rigid-focused |

| Ink cost/sqm | Mid | Low | High |

| Same-day install | Yes | No | Yes |

| Fabric/textile | Yes (OEKO-TEX) | No | Limited |

| Recommended for hospitals/schools | Yes | No | Sometimes |

How Falcon Signs Specifies Each Technology

  • HP Latex — default for all indoor work, fabric, and fast-turnaround jobs
  • Eco-solvent — outdoor banners and vehicle wraps where budget is primary
  • UV-LED — rigid substrates (ACP, acrylic, dibond), packaging, direct-to-material

We operate all three technologies in-house at our Mombasa Road facility — so you are specified onto the right technology for your project, not the only one the supplier happens to own.

Related Reading

[Why HP Latex is best for indoor branding](/blog/why-hp-latex-is-best-for-indoor-branding), [eco-friendly signage solutions in Kenya](/blog/eco-friendly-signage-solutions-kenya), [safe printing for commercial spaces](/blog/safe-printing-for-commercial-spaces).

Get a Specification Consult

Contact Falcon Signs on +254 722 565 111 or [request a quote](/contact). Tell us the application and we will specify the right technology.

Need Expert Signage?

Contact Falcon Signs for a free consultation and quote — 30+ years of experience, 242 products, zero outsourcing.